Congratulations on getting called for that all-important, career-changing civil engineering interview. But, now comes the hard part. The most important part of preparing for an interview is to be aware of what kind of civil engineering interview questions might be thrown in your direction. That way, you will be in a great position to prepare your answers well in advance and feel confident that your responses will impress the interviewer.
Here’s a list of 8 must-know civil engineering interview questions and answers to ensure your next interview is a success.
1. Can you describe what a projection line is?
Projection line can be described as the way in which the earth is displayed on a flat piece of paper.
2. Can you list out the various steps involved in the concreting process?
The main steps involved in the concreting process are as follows:
• Batching
• Mixing
• Transporting and placement of concrete
• Compacting
Here’s a list of 8 must-know civil engineering interview questions and answers to ensure your next interview is a success.
1. Can you describe what a projection line is?
Projection line can be described as the way in which the earth is displayed on a flat piece of paper.
2. Can you list out the various steps involved in the concreting process?
The main steps involved in the concreting process are as follows:
• Batching
• Mixing
• Transporting and placement of concrete
• Compacting
Here are also some non-technical aspects of the interview you should know about: 10 Tips to stay focused in an interview
3. List out the reinforcements that are used in the process of prestressing.
There are three primary types of reinforcements that are used in the prestressing process. They are:
• Spalling Reinforcements.
• Equilibrium Reinforcements.
• Bursting Reinforcements.
4. How would you describe the soundness of cement?
Cement soundness can be described as a property which ensures that the cement does not go through any appreciable expansion or experience any change in volume once it has been set. This process helps get rid of any possibilities of the mortar or concrete from getting disrupted.
There are three primary types of reinforcements that are used in the prestressing process. They are:
• Spalling Reinforcements.
• Equilibrium Reinforcements.
• Bursting Reinforcements.
4. How would you describe the soundness of cement?
Cement soundness can be described as a property which ensures that the cement does not go through any appreciable expansion or experience any change in volume once it has been set. This process helps get rid of any possibilities of the mortar or concrete from getting disrupted.
In case you’re scheduled for a telephonic interview, here are some points to keep in mind: Phone Interview Tips: 10 Keys to succeed in a telephonic interview
5. Explain Fatigue. Can you point out some of the structures that may be subjected to fatigue?
Fatigue can be described as the gradual damage to a structure that occurs when it is subjected to cyclic loading (repeated loading and unloading). Some of the structures that may be subjected to fatigue include:
• Bridges that are heavily loaded
• Hydraulic Presses
• Aircrafts
• Concrete Reservoirs
• Pylons
• Turbines
• Overhead cranes
• Transmission towers
• Offshore platforms
• Burners trains
6. Describe the various types of slump test indications.
Slump tests are initiated to empirically measure the consistency of fresh concrete before it sets. They can also be used to check for an improperly mixed batch of concrete as well. There are three different types of slumps that occur in slump tests listed as below:
• True Slump
• Shear Slump
• Collapse Slump
Fatigue can be described as the gradual damage to a structure that occurs when it is subjected to cyclic loading (repeated loading and unloading). Some of the structures that may be subjected to fatigue include:
• Bridges that are heavily loaded
• Hydraulic Presses
• Aircrafts
• Concrete Reservoirs
• Pylons
• Turbines
• Overhead cranes
• Transmission towers
• Offshore platforms
• Burners trains
6. Describe the various types of slump test indications.
Slump tests are initiated to empirically measure the consistency of fresh concrete before it sets. They can also be used to check for an improperly mixed batch of concrete as well. There are three different types of slumps that occur in slump tests listed as below:
• True Slump
• Shear Slump
• Collapse Slump
